November 2021 Volume 3

EQUIPMENT & TECHNOLOGY

References: 1 "Condensation in Switchgear and Anti-Condensation Heaters" Jim Bowen, Technical Director, Powell Industries, Inc. April, 25,2003, 01.4TB.091

If you would like to know more about adopting a pro-active cooling system maintenance program, please feel free to contact us. Josh Carney Integral Power Technologies Email: jcarney@integralpowertechnologies.com

Expensive power components like this DC choke can be damaged internally by frozen water. Encapsulated magnetics (i.e.transformers and inductors) may not leak externally but the burst tube may cause windings to short circuit and alter the inductor characteristics. Photo source: Integral Power Technologies BottomLine Manufacturing facilities located in cold weather climates will benefit from the maintenance of their equipment. Cold weather preventative maintenance is more easily accomplished before the air temperature goes below freezing. ■

SINTO SURFACE TREATMENT Superior Products for Cleaning Forging and Heat-treat Scale

Equipment, Abrasives, Service

Y30 Blast Wheel WE3 Air Wash Separator

Steel Cut-Wire for Shot Blasting VS. Cast Steel Shot Frohn Cut-Wire will:

- Reduce cycle times by 40% -Increase machine capacity - Reduce downtime

Frohn Cut-Wire

CNDR Drum Blast

TM

www.sinto.com

SINTO AMERICA SINTOKOGIO, LTD. www.sintoamerica.com sales@sintoamerica.com 150 Orchard St. Grand Ledge, MI 48837 Tel 517.371.2460 Fax 517.371.4930

FIA MAGAZINE | NOVEMBER 2021 13